SOLAREZ UV Cure Epoxy Ding Resin

Epoxy ding repair is one of the basic SUP/surfboard repairs that every rider should know. While there are many ways to repair dings, this is the most popular method because it’s quick, easy, and effective.

This guide will show you how to use SOLAREZ UV Cure Epoxy Ding Resin to fix your board so you can get back on the water as soon as possible.

Solarez is the number 1 recommendation for fixing EPS foam plus stand-up epoxy resin paddleboards.

It is a high-strength, precise, UV epoxy resin—fiber-reinforced repair putty mixture.

Features SUP Paddleboard & Surfboard Repair Kit

To fix your board, cut away any loose foam and fiberglass and squeeze the clear gel to change the void roughly.

It is known as “Solarez” because it cures when sunlight is introduced, so you can work on your project in the garage and then walk it outside to fix the complete process in under five minutes.

Once it dries, you can sand it down to the actual shape of your board.

The outcome is a hundred percent waterproof repair, and you can safely take your board back into the water.

Read next – Soft Top Surfboard – Best Foam SurfBoard

Key Features

• Contains Solarez UV cure Epoxy resin and a 60/240 Grit Sand pad.
• No mixing is necessary. UV curving assures complete hardening.
• Offers full crosslinking. Remarkably hard and resilient.
• Imported from the USA
• It contains urethanes that keep it from yellowing, is eco-friendly, has zero vapors, and is non-flammable.
• These resins cure amazingly dry, unlike other UV cure resins that are cure tacky.

Conventional repair contains mixing resin with a hardening agent in the correct ratios.

Once you begin the process, the hardening starts, and you have x number of minutes to get everything right before it all hardens up.

There is a lot of room for errors, and worse if you get the ratio off even as little as five percent, and you have other issues, such as a repair that will never wholly cure or harden.

Solarez takes out the human error of mixing hardeners and resins and then separates the preparation time from the curing time, as you can prep the repair out of the sun and cure it when you are ready.

It cures in about three to five minutes.

Read next – Aqua Plus Inflatable SUP for All Skill Levels Boat Review

What is SOLAREZ UV Cure Epoxy Ding Resin?

SOLAREZ UV Cure Epoxy Ding Resin is a two-part epoxy resin that cures quickly when exposed to sunlight or artificial UV light. It is ideal for repairing dings and small cracks in SUPs and surfboards.

This resin is straightforward and can be mixed with pigments to create custom colors. It is solid and durable, making it perfect for repairs that require a lot of wear and tear.

What is SOLAREZ UV Cure Epoxy Ding Resin?

SOLAREZ UV Cure Epoxy Ding Resin is a two-part system that cures (hardens) quickly when exposed to sunlight or artificial UV light.

The mixed resin has a consistency similar to honey and becomes very hard yet flexible when cured. It can repair dings, cracks, and other damage to SUPs and surfboards.

How to Use SOLAREZ UV Cure Epoxy Ding Resin

SOLAREZ UV Cure Epoxy Ding Resin is a great way to repair your SUP or surfboard.

Here are some tips on how to use it:

• Start by sanding the area around the ding with 120-grit sandpaper. This will help the resin adhere better.
• Mix equal parts of the resin and hardener. Stir until they are thoroughly mixed.
• Apply the mixture to the ding using a putty knife or other tool. Spread it evenly over the area.
• Use a UV light to cure the resin. Hold the light about 6 inches from the surface and move it around until the entire area is exposed to the light. You can find UV lights at most hardware stores.
• Once cured, sand the area smoothly with 220-grit sandpaper and wipe clean with a damp cloth.

What are the benefits of using SOLAREZ UV Cure Epoxy Ding Resin?

SOLAREZ UV Cure Epoxy Ding Resin is a two-part epoxy resin that can repair dings and cracks in your SUP or surfboard.

The resin is clear, so it will not affect the look of your board, and it dries quickly when exposed to UV light.

The main benefit of using SOLAREZ UV Cure Epoxy Ding Resin is that it is much stronger than traditional epoxy resins.

It can also be used on wet or dry surfaces, making it ideal for repairs in the water. The resin is also flexible and will not crack or break under stress.

Read Next – Ding All Super Stand Up Paddle Board Epoxy Repair Kit

How does SOLAREZ UV Cure Epoxy Ding Resin compare to other ding repair products?

Other ding repair products require using a heat gun or oven to cure the resin, which can be time-consuming and difficult to control.

SOLAREZ UV Cure Epoxy Ding Resin cures quickly and easily with the included UV flashlight so that you can get back in the water sooner.

The rugged, clear epoxy resin is also more durable than other products on the market, so your repairs will last longer.

EPOXY DING REPAIR | Epoxy Surfboard Ding Repair

Read next – SUP Epoxy Repair Putty + Epoxy Surfboard Repair With Solarez

Conclusion

SOLAREZ UV Cure Epoxy Ding Resin is an excellent product for repairing SUP and surfboard dings.

It is easy to use, cures quickly, and produces a substantial repair. We highly recommend this product to anyone looking for a quick and easy way to fix their boards.