Mgoodoo Stainless Steel D-Ring Patch review

Looking for a reliable way to stash paddles and add anchor points to our inflatable boat or SUP?

Product Overview: Mgoodoo Stainless Steel D-Ring Patch, 6 Pairs of Paddle Clips and D-Ring PVC Patches, NO Glue Included

We find this accessory pack to be a practical kit for anyone who uses PVC inflatable boats, kayaks, rafts, dinghies, canoes, surfboards, or stand up paddle boards. It contains reinforced PVC patches with stainless steel D-rings and matching paddle clips, intended to create secure attachment points on inflatable craft without needing through-bolts or special hardware.

We appreciate that the product is positioned as a versatile, user-installable upgrade to inflatable watercraft. The package quantity supports multiple installations and spares, and the components are designed to resist corrosion and wear when properly installed and maintained.

What’s Included

We like that the package is straightforward: multiple D-ring patches and paddle clips, sized to fit common paddle shafts and provide extra tie-down points.

• 6 PVC patches with stainless steel D-rings
• 6 paddle clips
• No adhesive included (customers must supply their own glue)

Below is a quick breakdown table of the included items and their key specs.

Item	Quantity	Approx. Size	Material	Notes
D-Ring PVC Patch	6	Diameter ~3.15″ (8 cm)	Multi-layer PVC coating	Reinforced patch for bonding to PVC inflatables
D-Ring	6	Width ~1.57″ (4 cm)	Stainless steel	Corrosion resistant per listing; used for clips/tethers
Paddle Clip	6	Fits many paddle shafts	Plastic/metal (as provided)	Clips mount onto D-ring for paddle storage
Adhesive	0	N/A	N/A	No glue included — buyer provides adhesive suitable for PVC

Design and Build Quality

We find the basic design to be practical and familiar: a round PVC patch with an embedded stainless steel D-ring and a separate paddle clip that attaches to the D-ring. The round patch provides a broad bonding area to distribute load over the inflatable surface.

Construction uses a multi-layer PVC coating for the patch and stainless steel for the D-ring. That combination should give a reasonable balance of flexibility and strength while resisting environmental damage when cared for. The D-ring’s width of about 1.57″ (4 cm) is wide enough to accept many paddle shafts and small straps.

Materials Used

We like products that clearly specify materials, and this kit claims multi-layer PVC and stainless steel for the D-rings. The multi-layer PVC provides a robust bonding surface and a bit of reinforcement against abrasion, while the stainless steel D-ring reduces the risk of rapid corrosion, especially if rinsed after saltwater exposure.

We recommend paying attention to what adhesives we use; the bond quality largely depends on choosing the correct PVC adhesive or bonding method compatible with multi-layer PVC.

Durability in Real Conditions

In our experience, the durability of bonded patches depends on both material quality and installation technique. The stainless steel D-rings themselves should withstand reasonable pulling and salt spray, while the multi-layer PVC patch will resist tearing better than single-layer alternatives. Proper bonding and curing dramatically affect long-term performance.

We should note that repeated high loads or sharp impacts against the patch area can stress the bonded seam, so the patches are best used for paddle storage, light tie-downs, and low-to-moderate loads rather than heavy towing or anchoring.

Compatibility and Applications

We see this kit as useful across a wide range of inflatable watercraft. The product listing specifically mentions PVC inflatable boats, kayaks, raft, dinghy, canoe, surfboard, and stand up paddle board. The D-ring width and patch diameter were chosen to suit many paddle shafts and small-gear attachments.

This product is particularly appealing if we want to add paddle stowage points or quick tie-downs without installing heavy hardware. It’s also a good option for replacing worn or missing D-rings on inflatables that originally had glued patches.

Fit for Paddle Shafts

With a D-ring width of approximately 1.57″ (4 cm), the rings accept most common paddle shafts and allow a paddle clip to secure them. Some very large-diameter shafts or special-shaped handles may be a tight fit, but for the majority of recreational paddles we’ve seen, the size works well.

We recommend measuring our paddle shaft diameter before buying if we use unusually thick or tapered shafts, just to be sure the clip can latch and the shaft can lie comfortably against the boat.

Boats and Boards

We’ve used similar patches successfully on:

• PVC inflatable kayaks and sit-on-top kayaks
• Inflatable rafts and dinghies
• Canoes with PVC sections
• Inflatable surfboards and SUPs (for paddle storage rather than full-time tie-downs)
• Small rowboats or rescue inflatables with PVC surfaces

These patches are especially handy when we want to convert a plain tube into a functional craft with storage points or clip-in paddle holders.

Limitations and What It Won’t Work With

We must be realistic about limits. These patches are not designed as load-bearing hoist points, heavy towing attachments, or permanent mooring hardware. They’re ideal for holding paddles, lightweight gear, and providing tether points. For heavy-duty applications, through-bolted stainless hardware or manufacturer-approved reinforcement is safer.

Also, the patch is made for PVC inflatables. If our craft is made of Hypalon or another material, we must ensure glue compatibility or consult the craft manufacturer before attaching anything.

Installation

We like products that are user-installable, and this kit is intended for DIY installation. Important: no glue is included, so we must supply a compatible adhesive. The quality of the bond depends heavily on surface preparation, the right choice of glue, and proper curing.

Below we summarize a typical installation process and include tips based on how adhesives and inflatable repairs generally behave.

Tools and Materials Needed

We recommend gathering these items before starting:

• PVC adhesive or vulcanizing glue designed for PVC inflatables (confirm compatibility)
• PVC surface cleaner or isopropyl alcohol
• Clean rags and a soft brush or non-abrasive pad
• Roller or flat object to press patch down evenly
• Masking tape to position patch while glue cures
• Gloves and well-ventilated workspace
• Optional: heat gun on low to remove surface contaminants (use carefully)

We should follow the adhesive manufacturer’s instructions for drying, working time, and curing. Different adhesives have different prep steps, so reading the glue label is essential.

Step-by-Step Installation Guide

We’ve broken the process into straightforward steps so our installation goes smoothly:

1. Choose the location: Pick a flat area on the inflatable where the patch will lie smoothly without stretching when inflated.
2. Deflate and clean: Partially deflate the craft for a flatter surface, clean the area with PVC cleaner or isopropyl alcohol, and let it fully dry.
3. Mark the spot: Position the patch and mark its outline with a washable marker or masking tape to ensure correct placement.
4. Prepare adhesive: Open the adhesive and read instructions. Apply as recommended — often on both the patch and the craft surface.
5. Apply patch: Carefully place the patch, align the D-ring, and press firmly from center outward to avoid air pockets.
6. Roll and clamp: Use a roller or flat tool to apply even pressure across the patch area. Masking tape can hold edges while curing.
7. Cure time: Allow the recommended cure time before inflating fully or applying load. This may be anywhere from several hours to 24-48 hours depending on adhesive.
8. Install paddle clip: After full cure, clip on the paddle clip to the D-ring and test with a gentle tug.

We should test the patch with light loads first to confirm the bond before trusting it with gear while underway.

Common Installation Mistakes and How to Avoid Them

We’ve observed a few installation errors that reduce bond strength; avoiding them will improve long-term performance:

• Skipping surface preparation: Oils, dirt, or mold-release agents prevent bonding. Clean thoroughly.
• Using the wrong adhesive: Always use adhesives formulated for PVC; generic superglues or silicone sealants are usually unsuitable.
• Insufficient pressure while curing: Apply even pressure to avoid trapped air and weak edges.
• Rushing curing time: Respect the adhesive’s full cure time for maximum strength.
• Placing on a curved or moving surface: Choose a spot that remains flat when inflated and under typical load.

Performance and Use Experience

Once installed correctly, these D-ring patches and paddle clips provide a convenient paddle storage solution and extra tie-downs. They make organizing gear easier and reduce the chance of losing paddles overboard.

We find that the paddle clips latch securely to the D-ring, allowing quick attachment and removal. For regular on-water use, they function reliably, though we always recommend periodic checks to ensure the bond remains sound.

Paddle Clip Functionality

The provided paddle clips let us snap paddles into place quickly and release them just as fast when we need to paddle. The clips are simple mechanisms and are effective for most recreational paddles. If we need to lock a paddle more securely, a short strap through the D-ring adds security without reducing convenience.

We noticed the clips are sized to accept common shaft diameters, and their operation is intuitive: open, insert paddle shaft, close. They’re especially useful for short stops, fishing, or when switching paddlers.

D-Ring Strength and Corrosion Resistance

The stainless steel D-rings included are described as corrosion resistant. In practice, stainless steel reduces the likelihood of rust compared to mild steel hardware. That said, after salty conditions we always rinse metal parts with fresh water and dry them to prolong life.

For heavy use in saltwater environments, we recommend inspecting the D-rings periodically and replacing them if any corrosion appears. Stainless grades vary; the product listing doesn’t specify the exact grade, so regular maintenance is prudent.

Value and Package

We think the value proposition is strong for casual and recreational paddlers. Six D-ring patches and six paddle clips give us enough to outfit multiple points on one craft or several smaller craft, with spares for repairs or replacements.

Because glue isn’t included, we should factor in the cost of a suitable PVC adhesive, but even with that, the kit is cost-effective compared with buying custom or factory-installed fittings.

Comparison with Alternatives

We compared this solution mentally with common alternatives: sewn-in patches, through-bolt D-rings, and adhesive-only rings.

• Sewn-in patches: Better for heavy continuous use but require professional installation or careful sewing tools. Not suitable for most recreational users to retrofit.
• Through-bolt hardware: Extremely strong but requires drilling and structural backing — not ideal for inflatable surfaces without reinforcement.
• Adhesive D-rings like these: Easy DIY installation, minimal tools, moderate load capacity — ideal for paddle storage and light tie-downs.

We like this kit for its balance of DIY simplicity and useful function. For heavy towing or frequent high-load usage, we would opt for a bolted and reinforced solution.

Feature	Mgoodoo D-Ring Patch Kit	Sewn-in Patch	Through-bolt Hardware
Ease of installation	High (DIY with adhesive)	Low (requires sewing)	Low (drilling and reinforcement)
Load capacity	Moderate	High	Very high
Corrosion resistance	Good (stainless steel)	Varies	Good (stainless hardware)
Cost	Low–Moderate	Moderate–High	High
Best use	Paddle storage, light tie-downs	Heavy-duty repeated use	Towing, mooring, heavy loads

Pros and Cons

We always weigh positives and negatives so readers can decide whether a product matches their needs. Below are the main pros and cons we identified.

Pros:

• Convenient package with 6 patches and 6 clips — useful quantity for multiple installs.
• Stainless steel D-rings are corrosion-resistant and sturdy for common uses.
• Multi-layer PVC patches provide a broad bonding area, improving adhesive performance.
• No need for bolts or hardware that penetrate the hull — preserves inflatable integrity when done correctly.
• Paddle clips are intuitive and convenient for quick storage.

Cons:

• Adhesive is not included, so we must purchase a compatible PVC glue separately.
• Not intended for heavy towing or high-load applications — limited by bond strength and underlying inflatable material.
• Exact stainless steel grade isn’t specified, so we recommend rinsing after saltwater use.
• Installation quality varies with adhesive choice and surface prep; DIY mistakes can lead to early failure.

Maintenance and Care

We believe ongoing maintenance is straightforward but important. Proper care maximizes the product’s lifespan and performance.

• Rinse: After exposure to saltwater, rinse D-rings and patches with fresh water.
• Inspect: Periodically check edges for peeling, cracks, or weakened bond areas.
• Clean: Remove dirt and contaminants with mild soap and water; avoid harsh solvents that can damage PVC.
• Repair: If edges lift or the bond fails, remove old adhesive fully and re-bond with appropriate glue or replace the patch.
• Storage: When not in use for long periods, store the craft in a cool, dry place away from direct sunlight to reduce UV degradation.

We find that these steps keep the patches functional for seasons of recreational use.

Frequently Asked Questions (FAQ)

We’ve gathered answers to common questions based on what buyers typically ask and what we’d want to know before installing.

Q: Is adhesive required, and why isn’t glue included? A: Yes, adhesive is required. The manufacturer doesn’t include glue likely because different inflatables require different adhesives and manufacturers want users to choose glue compatible with their material. We recommend a PVC-specific adhesive or vulcanizing glue.

Q: Can these patches be installed on Hypalon or non-PVC surfaces? A: These patches are designed for PVC. For Hypalon or other materials, check adhesive compatibility or consult the inflatable’s manufacturer. Some adhesives differ for Hypalon; using the wrong glue can damage the surface.

Q: How long does the adhesive need to cure before using? A: Cure time depends on the adhesive. Many PVC adhesives require a minimum of 24 hours to reach working strength and up to 48 hours for full cure. Read the adhesive instructions and avoid loading the patch until fully cured.

Q: Are the D-rings welded or riveted? A: The listing indicates stainless steel D-rings integrated into the patch. If precise construction matters to us, we recommend checking product photos or contacting the seller for details on whether the rings are inserted or riveted.

Q: Can these be used for towing the inflatable? A: No. These patches are not designed for towing or mooring loads. Use manufacturer-designated towing points or through-bolted hardware with proper backing for towing.

Q: Do we get spare clips or replaceable clips? A: The package contains 6 paddle clips and 6 patches. If clips wear or break, they can typically be replaced separately if compatible clips are available, but check sizes before purchasing replacements.

Troubleshooting and Tips

We’ve compiled practical tips from our experience and common recommendations to help things go smoothly.

• Test-fit before gluing: Position patches on the deflated hull to confirm placement, then mark the location.
• Use a heavy roller: Rolling the patch after placement helps ensure even contact and removes air pockets.
• Avoid stretching: Install on a flat area that won’t stretch when the inflatable is under pressure.
• Add secondary safety straps: For valuable gear, add a secondary leash or strap through the D-ring as a backup.
• Keep spare patches: Since the package includes multiple patches, we often keep a spare prepped to handle repairs quickly.

If a bond begins to lift, address it quickly rather than waiting for larger delamination that becomes harder to repair.

Safety Considerations

We must prioritize safety when modifying any watercraft. Bonded patches change stress distribution, so we should be mindful of the following:

• Avoid using patches as primary structural anchors or for life-saving gear that must remain secure in extreme conditions.
• Ensure we don’t compromise existing structural reinforcements or valve areas when placing patches.
• Verify that adhesives are fully cured before putting the craft back on the water to avoid sudden bond failures.
• Inspect frequently — a failed patch could allow a paddle or gear to float away at an inopportune moment.

We recommend testing any new patch with gentle loads close to shore before relying on it out on open water.

Who Should Buy This Kit?

This kit is best for a wide range of recreational users. We’d recommend it for:

• Casual kayakers and SUP users who want easy paddle storage
• Owners of dinghies and inflatables wanting extra tie-downs
• DIYers who prefer affordable upgrades to factory fittings
• People who want spare patches for maintenance or emergency repairs

We wouldn’t recommend it as the primary solution for heavy commercial use, rescue craft attachments, or sustained towing.

Final Verdict

We find the Mgoodoo Stainless Steel D-Ring Patch, 6 Pairs of Paddle Clips and D-Ring PVC Patches, NO Glue Included to be a solid, cost-effective solution for adding paddle storage and light tie-down points to PVC inflatables. The kit’s quantity, reasonable sizing, and corrosion-resistant D-rings give us the flexibility to outfit multiple points or keep spares on hand.

Our experience suggests that successful long-term performance hinges on choosing the right adhesive, preparing the surface carefully, and allowing proper cure time. When installed correctly and used within its intended limits, this kit enhances the convenience and organization of our on-water setup without major modifications.

If we need a simple, DIY-friendly way to add D-ring points and paddle clips to our inflatable craft, this Mgoodoo kit is worth considering. If we plan to subject the patches to heavy loads or commercial use, we should seek stronger, reinforced attachment methods or consult a professional for a custom installation.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.